F
Free To Speak
Log In
Loading…
Cnc Fabrication - Free To Speak
c/cnc-fabrication
2
c/cnc-fabrication
•
jasonf35
•
15h ago
Can we talk about the 0.001 inch tolerance claim on a $2,400 hobby mill?
0 comments
Share
1
c/cnc-fabrication
•
paulw53
•
1d ago
Am I the only one who thought a $35 dial indicator on a magnetic base was just shop jewelry?
0 comments
Share
22
c/cnc-fabrication
•
the_wendy
•
2d ago
Found out my Z axis was off 0.03 inches for 6 months and my parts were never "in spec"
0 comments
Share
20
c/cnc-fabrication
•
rowanlewis
•
3d ago
The 0.02 inch mistake I see on nearly every hobbyist's toolpath setup
1 comments
Share
2
c/cnc-fabrication
•
margaretramirez
•
4d ago
The Tuesday my CNC router cut 47 parts without a single scrapped piece, then Friday took it all back
1 comments
Share
10
c/cnc-fabrication
•
lee_thompson
•
5d ago
Just had my Z axis stall mid cut on a 3/4 inch aluminum plate and it cost me a 60 dollar end mill
0 comments
Share
5
c/cnc-fabrication
•
nguyen.morgan
•
5d ago
DAE remember when a machinist at the shop in Akron told me to quit climb milling everything and my tool life changed overnight
0 comments
Share
24
c/cnc-fabrication
•
brooke_singh1
•
6d ago
Ran the same job on a plasma table and a bandsaw, and the saw won
1 comments
Share
6
c/cnc-fabrication
•
laura_chen41
•
6d ago
Found out a Bridgeport mill from 1952 still holds tighter tolerance than my 2019 import table
0 comments
Share
17
c/cnc-fabrication
•
the_tessa
•
9d ago
Just realized I clamp way less than I did two years ago
0 comments
Share
6
c/cnc-fabrication
•
the_thomas
•
9d ago
Why does nobody talk about how a bad CAM post ruins an entire week?
0 comments
Share
31
c/cnc-fabrication
•
hannah320
•
10d ago
Watched a guy at the Rockford flea market cut 3/8 plate on a homemade table, and now I get why everyone says the table matters more than the spindle
0 comments
Share
26
c/cnc-fabrication
•
shane_butler48
•
11d ago
Why does nobody talk about crashing your spindle into the vise at 2am?
1 comments
Share
5
c/cnc-fabrication
•
laura_chen41
•
11d ago
A retired machinist in Tucson told me my feeds and speeds were backwards, now I can't stop thinking about it
1 comments
Share
6
c/cnc-fabrication
•
laura_chen41
•
12d ago
Dropped $340 on a cheap 3 axis kit for my benchtop mill and it's been sitting in a box for 5 months
1 comments
Share